**TL;DR: NFY** (Not for you).

In this post, I will list those books which have been actually helpful to me during my self-studies of QM.

But before coming to the list, let me first note down a few points which would be important for *engineers* who wish to study QM on their own. After all, my blog is regularly visited by engineers too. That’s what the data about the visit patterns to various posts says.

Others (e.g. physicists) may perhaps skip over the note in the next section, and instead jump directly over to the list itself. However, even if the note for engineers is too long, perhaps, physicists should go through it too. If they did, they sure would come to know a bit more about the kind of background from which the engineers come.

**I. A note for ***engineers* who wish to study QM on their own:

*engineers*who wish to study QM on their own:

The point is this: QM is vast, even if its postulates are just a few. So, it takes a prolonged, sustained effort to learn it.

For the same reason (of vastness), learning QM also involves your having to side-by-side learn an entirely new approach to learning itself. (If you have been a good student of engineering, chances are pretty good that you already have some first-hand idea about this meta-learning thing. But the point is, if you wish to understand QM, you have to put it to use once again afresh!)

In terms of vastness, QM is, in some sense, comparable to this cluster of subjects spanning engineering and physics: engineering thermodynamics, statistical mechanics, kinetics, fluid mechanics, and heat- and mass-transfer.

**I.1 Thermodynamics as a science that is hard to get right:**

The four laws of thermodynamics (including the zeroth and the third) are easy enough to grasp—I mean, in the simpler settings. But when it comes to this subject (as also for the Newtonian mechanics, i.e., from the particle to the continuum mechanics), *God lies not in the postulates but in their applications*.

The statement of the first law of thermodynamics remains the same simple one. But complexity begins to creep in as soon as you begin to dig just a little bit deeper with it. Entire *categories* of new considerations enter the picture, and the meaning of the same postulates gets both enriched and deepened with them. For instance, consider the distinction of the open vs. the closed vs. the isolated systems, and the corresponding changes that have to be made even to the mathematical statements of the law. That’s just for the starters. The complexity keeps increasing: studies of different processes like adiabatic vs. isochoric vs. polytropic vs. isentropic etc., and understanding the nature of these idealizations and their relevance in diverse practical applications such as: steam power (important even today, specifically, in the nuclear power plants), IC engines, jet turbines, refrigeration and air-conditioning, furnaces, boilers, process equipment, etc.; phase transitions, material properties and their variations; empirical charts….

Then there is another point. To really understand *thermodynamics* well, you have to learn a lot of *other* subjects too. You have to go further and study some different but complementary sciences like heat and mass transfer, to begin with. And to do that well, you need to study fluid dynamics first. Kinetics is practically important too; think of process engineering and cost of energy. Ideas from statistical mechanics are important from the viewpoint of developing a fundamental understanding. And then, you have to augment all this study with all the empirical studies of the irreversible processes (think: the boiling heat transfer process). It’s only when you study such an entire gamut of topics and subjects that you can truly come to say that you now have some realistic understanding of the subject matter that is thermodynamics.

Developing understanding of the aforementioned vast cluster of subjects (of thermal sciences) is difficult; it requires a sustained effort spanning over years. Mistakes are not only very easily possible; in engineering schools, they are routine. Let me illustrate this point with just one example from thermodynamics.

Consider some point that is somewhat nutty to get right. For instance, consider the fact that no work is done during the free expansion of a gas. If you are such a genius that you could correctly get this point right on your very first reading, then hats off to you. Personally, I could not. Neither do I know of even a single engineer who could. We all had summarily stumbled on some fine points like this.

You see, what happens here is that thermodynamics and statistical mechanics involve entirely different ways of thinking, but they *both* are being introduced almost at the same time during your UG studies. Therefore, it is easy enough to mix up the some disparate metaphors coming from these two entirely different paradigms.

Coming to the specific example of the free expansion, initially, it is easy enough for you to think that since momentum is being carried by all those gas molecules escaping the chamber during the free expansion process, there must be a leakage of work associated with it. Further, since the molecules were already moving in a random manner, there must be an accompanying leakage of the heat too. *Both* turn out to be *wrong* ways of thinking about the process! Intuitions about thermodynamics develop only slowly. You think that you understood what the basic idea of a system and an environment is like, but the example of the free expansion serves to expose the holes in your understanding. And then, it’s not just thermo and stat mech. You have to learn how to separate both from kinetics (and they all, from the two other, closely related, thermal sciences: fluid mechanics, and heat and mass transfer).

But before you can learn to separate out the unique perspectives of these subject matters, you first have to *learn* their *contents!* But the way the university education happens, you also get exposed to them more or less *simultaneously!* (4 years is as nothing in a career that might span over 30 to 40 years.)

Since you are learning a lot many different paradigms at the same time, it is easy enough to naively transfer your fledgling understanding of one aspect of one paradigm (say, that of the particle or statistical mechanics) and naively insert it, in an invalid manner, into another paradigm which you are still just learning to use at roughly the same time (thermodynamics). This is what happens in the case of the free expansion of gases. Or, of throttling. Or, of the difference between the two… It is a rare student who can correctly answer all the questions on this topic, during his oral examination.

Now, here is the ultimate point: Postulates-wise, thermodynamics *is* independent of the rest of the subjects from the aforementioned cluster of subjects. So, in theory, you should be able to “get” thermodynamics—its postulates, in all their generality—even without ever having learnt these *other* subjects.

Yet, paradoxically enough, we find that complicated concepts and processes also become *easier* to understand when they are approached using many different conceptual pathways. A good example here would be the concept of entropy.

When you are a XII standard student (or even during your first couple of years in engineering), you are, more or less, just getting your feet wet with the idea of the differentials. As it so happens, before you run into the concept of entropy, virtually every physics concept was such that it was a ratio of *two* differentials. For instance, the instantaneous velocity is the ratio of d(displacement) over d(time). But the definition of *entropy* involves a more creative way of using the calculus: it has a differential (and that too an *inexact* differential), but only in the numerator. The denominator is a “plain-vanilla” variable. You have already learnt the maths used in dealing with the rates of changes—i.e. the calculus. But that doesn’t mean that you have an already learnt physical imagination with you which would let you handle *this* kind of a definition—one that involves a ratio of a *differential* quantity to an *ordinary* variable. … “Why should only one thing change even as the other thing remains steadfastly constant?” you may wonder. “And if it is anyway going to stay constant, then is it even significant? (Isn’t the derivative of a constant the zero?) So, why not just throw the constant variable out of the consideration?” You see, one major reason you can’t deal with the definition of entropy is simply because you can’t deal with the way its maths comes arranged. Understanding entropy in a purely thermodynamic—i.e. continuum—context can get confusing, to say the least. But then, just throw in a simple insight from Boltzmann’s theory, and suddenly, the bulb gets lit up!

So, paradoxically enough, even if multiple paradigms mean *more* work and even more possibilities of confusion, in some ways, having multiple approaches also does help.

When a subject is vast, and therefore involves multiple paradigms, people regularly fail to get certain complex ideas right. That happens even to very smart people. For instance, consider Maxwell’s daemon. Not many people could figure out how to deal with it correctly, for such a long time.

…All in all, it is only some time *later*, when you have already studied all these topics—thermodynamics, kinetics, statistical mechanics, fluid mechanics, heat and mass transfer—that finally things begin to fall in place (if they at all do, at any point of time!). But getting there involves hard effort that goes on for years: it involves learning all these topics individually, and then, also integrating them all together.

In other words, there is no short-cut to understanding thermodynamics. It seems easy enough to think that you’ve understood the 4 laws the first time you ran into them. But the huge gaps in your understanding begin to become apparent only when it comes to applying them to a wide variety of situations.

**I.2 QM is vast, and requires multiple passes of studies:**

Something similar happens also with QM. It too has relatively few postulates (3 to 6 in number, depending on which author you consult) but a vast scope of applicability. It is easy enough to develop a feeling that you have understood the postulates right. But, exactly as in the case of thermodynamics (or Newtonian mechanics), once again, *the God lies not in the postulates but rather in their applications*. And in case of QM, you have to hasten to add: *the God also lies in the very meaning of these postulates—not just their applications*. QM carries a one-two punch.

Similar to the case of thermodynamics and the related cluster of subjects, it is not possible to “get” QM in the first go. If you think you did, chances are that you have a superhuman intelligence. Or, far, far more likely, the plain fact of the matter is that you simply didn’t get the subject matter right—not in its full generality. (Which is what typically happens to the CS guys who think that they have mastered QM, even if the only “QM” they ever learnt was that of two-state systems in a finite-dimensional Hilbert space, and without ever acquiring even an inkling of ideas like radiation-matter interactions, transition rates, or the average decoherence times.)

The only way out, the only way that works in properly studying QM is this: Begin studying QM at a simpler level, finish developing as much understanding about its *entire scope* as possible (as happens in the typical Modern Physics courses), and then come to studying *the same* set of topics once again in a next iteration, but now to a greater depth. And, you have to keep repeating this process some 4–5 times. Often times, you have to come back from iteration n+2 to n.

As someone remarked at some forum (at Physics StackExchange or Quora or so), to learn QM, you have to give it “multiple passes.” Only then can you succeed understanding it. The idea of multiple passes has several implications. Let me mention only two of them. Both are specific to QM (and not to thermodynamics).

First, you have to develop the art of being able to hold some not-fully-satisfactory islands of understanding, with all the accompanying ambiguities, for extended periods of time (which usually runs into years!). You have to learn how to give a second or a third pass even when some of the things right from the first pass are still nowhere near getting clarified. You have to learn a lot of maths on the fly too. However, if you ask me, that’s a relatively easier task. The really difficult part is that you have to know (or learn!) how to keep forging ahead, even if at the same time, you carry a big set of nagging doubts that no one seems to know (or even care) about. (To make the matters worse, professional physicists, mathematicians and philosophers proudly keep telling you that these doubts will remain just as they are for the rest of your life.) You have to learn how to shove these ambiguous and un-clarified matters to some place near the back of your mind, you have to learn how to ignore them for a while, and still find the mental energy to once again begin right from the beginning, for your next pass: Planck and his cavity radiation, Einstein, blah blah blah blah blah!

Second, for the same reason (i.e. the necessity of multiple passes and the nature of QM), you also have to learn how to *unlearn* certain half-baked ideas and replace them later on with better ones. For a good example, go through Dan Styer’s paper on misconceptions about QM (listed near the end of this post).

Thus, two seemingly contradictory skills come into the play: You have to learn how to *hold* ambiguities without letting them affect your studies. At the same time, you *also* have to learn how *not* to *hold on* to them forever, or how to *unlearn* them, when the time to do becomes ripe.

Thus, learning QM does not involve just learning of new *contents*. You also have learn this *art* of building a sufficiently “temporary” but very complex conceptual structure in your mind—a structure that, despite all its complexity, still is *resilient*. You have to learn the art of holding such a framework together over a period of years, even as some parts of it are still getting replaced in your subsequent passes.

And, you have to compensate for all the failings of your teachers too (who themselves were told, effectively, to “shut up and calculate!”) Properly learning QM is a demanding enterprise.

**II. The list:**

Now, with that long a preface, let me come to listing all the main books that I found especially helpful during my various passes. Please remember, I am still learning QM. I still don’t understand the second half of most any UG book on QM. This is a factual statement. I am not ashamed of it. It’s just that the first half itself managed to keep me so busy for so long that I could not come to studying, in an in-depth manner, the second half. (By the second half, I mean things like: the QM of molecules and binding, of their spectra, QM of solids, QM of complicated light-matter interactions, computational techniques like DFT, etc.) … OK. So, without any further ado, let me jot down the actual list. I will subdivide it in several sub-sections

**II.0. Junior-college (American high-school) level:**

Obvious:

**Resnick and Halliday**.**Thomas and Finney**. Also,**Allan Jeffrey**

**II.1. Initial, college physics level:**

**“Modern physics” by Beiser**, or equivalent- Optional but truly helpful:
**“Physical chemistry” by Atkins**, or equivalent, i.e., only the parts relevant to QM. (I know engineers often tend to ignore the chemistry books, but they should not. In my experience, often times, chemistry books do a superior job of explaining physics. Physics, to paraphrase a witticism, is far too important to be left to the physicists!)

**II.2. Preparatory material for some select topics:**

**“Physics of waves” by Howard Georgi**. Excellence written all over, but precisely for the same reason, take care to avoid the temptation to get stuck in it!**Maths:**No particular book, but a representative one would be**Kreyszig**, i.e., with Thomas and Finney or Allan Jeffrey still within easy reach.- There are a few things you have to
**relearn**, if necessary. These include: the idea of the limits of sequences and series. (Yes, go through this simple a topic too, once again. I mean it!). Then, the limits of functions.

Also try to relearn curve-tracing. **Unlearn**(or throw away) all the accounts of complex numbers which remain stuck at the level of how was stupefying, and how, when you have complex*numbers*, any arbitrary equation magically comes to have roots, etc. Unlearn all that talk. Instead, focus on the similarities of complex numbers to both the real numbers and vectors, and also their differences from each. Unlike what mathematicians love to tell you, complex numbers are*not*just another kind of numbers. They*don’t*represent*just*the next step in the logic of how the idea of numbers gets generalized as go from integers to real numbers. The reason is this: Unlike the integers, rationals, irrationals and reals, complex numbers take birth as*composite*numbers (as a*pair*of numbers that is*ordered*too), and they remain that way until the end of their life. Get that part right, and ignore all the mathematicians’ loose talk about it.

Study complex numbers in a way that, eventually, you should find yourself being comfortable with the two equivalent ways of modeling physical phenomena: as a set of two coupled real-valued differential equations, and as a single but complex-valued differential equation.- Also try to become proficient with the two main
**expansions**: the Taylor, and the Fourier. - Also develop a habit of quickly substituting
(i.e., either a polynomial, or a sum complex exponentials having just a few initial harmonics, not an entire infinity of them) into any “arbitrary” function as an ansatz, and see how the proposed theory pans out with these. The goal is to become comfortable, at the same time, with a habit of tracing conceptual pathways to the meaning of maths as well as with the computational techniques of FDM, FEM, and FFT.*truncated*expansions **The finite differences approximation:**Also, learn the art of quickly substituting the finite differences (‘s) in place of the differential quantities ( or ) in a differential equation, and seeing how it pans out. The idea here is not just the computational modeling. The point is: Every differential equation has been derived in reference to an elemental volume which was then taken to a vanishingly small size. The variation of quantities of interest across such (infinitesimally small) volume are*always*represented using the Taylor series expansion.

(That’s correct! It is true that the derivations using the*variational*approach don’t refer to the Taylor expansion. But they also*don’t*use infinitesimal volumes; they refer to*finite*or*infinite*domains. It is the*variation*in functions which is taken to the vanishingly small limit in their case. In any case, if your derivation has an infinitesimall small element, bingo, you are going to use the Taylor series.)

Now, coming back to why you must learn develop the habit of having a finite differences approximation in place of a differential equation. The thing is this: By doing so, you are unpacking the derivation; you are traversing the analysis in the reverse direction, you are by the logic of the procedure forced to look for the physical (or at least lower-level, less abstract) referents of a mathematical relation/idea/concept.

While thus going back and forth between the finite differences and the differentials, also learn the art of tracing how the limiting process proceeds in each such a case. This part is not at all as obvious as you might think. It took me years and years to figure out that there can be infinitesimals within infinitesimals. (In fact, I have blogged about it several years ago here. More recently, I wrote a PDF document about how many numbers are there in the real number system, which discusses the same idea, from a different angle. In any case, if you were not shocked by the fact that there can be an infinity of infinitesimals within*any*infinitesimal, either think sufficiently long about it—or quit studying foundations of QM.)

- There are a few things you have to

**II.3. Quantum chemistry level (mostly concerned with only the TISE, not TDSE):**

- Optional:
**“QM: a conceptual approach” by Hameka**. A fairly well-written book. You can pick it up for some serious reading, but also try to finish it as fast as you can, because you are going to relean the same stuff once again through the next book in the sequence. But yes, you can pick it up; it’s only about 200 pages. **“Quantum chemistry” by McQuarrie**. Never commit the sin of bypassing this excellent book.

Summarily ignore your friend (who might have advised you Feynman vol. 3 or Susskind’s theoretical minimum or something similar). Instead, follow*my*advice!

A suggestion: Once you finish reading through this particular book, take a small (40 page) notebook, and write down (in the long hand) just the*titles*of the sections of each chapter of this book, followed by a listing of the important concepts / equations / proofs introduced in it. … You see, the section titles of this book themselves are*complete*sentences that encapsulate very neat nuggets. Here are a couple of examples: “5.6: The harmonic oscillator accounts for the infrared spectrum of a diatomic molecule.” Yes, that’s a section title! Here is another: “6.2: If a Hamiltonian is separable, then its eigenfunctions are products of simpler eigenfunctions.” See why I recommend this book? And this (40 page notebook) way of studying it?**“Quantum physics of atoms, molecules, solids, nuclei, and particles”**(yes, that’s the title of this single volume!)**by Eisberg and Resnick**. This Resnick is the same one as that of Resnick and Halliday. Going through the same topics via yet another thick book (almost 850 pages) can get exasperating, at least at times. But guess if you show some patience here, it should simplify things later. …. Confession: I was too busy with teaching and learning engineering topics like FEM, CFD, and also with many other things in between. So, I could not find the time to read this book the way I would have liked to. But from whatever I did read (and I did go over a fairly good portion of it), I can tell you that not finishing this book was a mistake on my part. Don’t repeat my mistake. Further, I do keep going back to it, and may be as a result, I would one day have finished it! One more point. This book is more than quantum chemistry; it does discuss the time-dependent parts too. The only reason I include it in this sub-section (chemistry) rather than the next (physics) is because the emphasis here is much more on TISE than TDSE.

**II.4. Quantum physics level (includes TDSE):**

**“Quantum physics” by Alastair I. M. Rae**. Hands down, the best book in its class. To my mind, it easily beats all of the following: Griffiths, Gasiorowicz, Feynman, Susskind, … .

Oh, BTW, this is the*only*book I have ever come across which does not put scare-quotes around the word “derivation,” while describing the original development of the Schrodinger equation. In fact, this text goes one step ahead and*explicitly*notes the right idea, viz., that Schrodinger’s development*is*a derivation, but it is an*inductive*derivation, not deductive. (… Oh God, these modern American professors of physics!)

But even leaving this one (arguably “small”) detail aside, the book has excellence written all over it. Far better than the competition.

Another attraction: The author touches upon all the standard topics within just about 225 pages. (He also has further 3 chapters, one each on relativity and QM, quantum information, and conceptual problems with QM. However, I have mostly ignored these.) When a book is of manageable size, it by itself is an overload reducer. (This post is not a portion from a text-book!)

The only “drawback” of this book is that, like many British authors, Rae has a tendency to seamlessly bunch together a lot of different points into a single, bigger, paragraph. He does not isolate the points sufficiently well. So, you have to write a lot of margin notes identifying those distinct, sub-paragraph level, points. (But one advantage here is that this procedure is very effective in keeping you glued to the book!)**“Quantum physics” by Griffiths**. Oh yes, Griffiths is on my list too. It’s just that I find it far better to go through Rae first, and only then come to going through Griffiths.- … Also, avoid the temptation to read both these books side-by-side. You will soon find that you can’t do that. And so, driven by what other people say, you will soon end up ditching Rae—
*which*would be a grave mistake. Since you can keep going through only one of them, you have to jettison the other. Here, I would advise you to first complete Rae. It’s indispensable. Griffiths is good too. But it is not indispensable. And as always, if you find the time and the inclination, you can always come back to Griffiths.

**II.5. Side reading:**

Starting sometime after finishing the initial UG quantum chemistry level books, but preferably after the quantum physics books, use the following two:

**“Foundations of quantum mechanics” by Travis Norsen**. Very, very good. See my “review” here [^]**“Foundations of quantum mechanics: from photons to quantum computers” by Reinhold Blumel**.

Just because people don’t rave a lot about this book doesn’t mean that it is average. This book is peculiar. It does look very average if you flip through all its pages within, say, 2–3 minutes. But it turns out to be an extraordinarily well written book once you begin to actually read through its contents. The coverage here is concise, accurate, fairly comprehensive, and, as a distinctive feature, it also is fairly*up-to-date*.

Unlike the other text-books, Blumel gives you a good background in the specifics of the modern topics as well. So, once you complete this book, you should find it easy (to very easy) to understand today’s pop-sci articles, say those on quantum computers. To my knowledge, this is the only*text*-book which does this job (of introducing you to the topics that are relevant to today’s research), and it does this job exceedingly well.- Use Blumel to understand the specifics, and use Norsen to understand their conceptual and the philosophical underpinnings.

**II.Appendix: Miscellaneous—no levels specified; figure out as you go along:**

**“Schrodinger’s cat” by John Gribbin**. Unquestionably, the best pop-sci book on QM. Lights your fire.**“Quantum” by Manjit Kumar.**Helps keep the fire going.**Kreyszig**or equivalent. You need to master the basic ideas of the Fourier theory, and of solutions of PDEs via the separation ansatz.- However, for many other topics like
**spherical harmonics**or calculus of variations, you have to go hunting for explanations in some additional books. I “learnt” the spherical harmonics mostly through some online notes (esp. those by Michael Fowler of Univ. of Virginia) and QM textbooks, but I guess that a neat exposition of the topic, couched in contexts other than QM, would have been helpful. May be there is some ancient acoustics book that is really helpful. Anyway, I didn’t pursue this topic to any great depth (in fact I more or less skipped over it) because as it so happens, analytical methods fall short for anything more complex than the hydrogenic atoms. - As to the
**variational calculus**, avoid all the physics and maths books like a plague! Instead, learn the topic through the FEM books. Introductory FEM books have become vastly (i.e. categorically) better over the course of my generation. Today’s FEM text-books do provide a clear evidence that the authors themselves know what they are talking about! Among these books, just for learning the variational calculus aspects, I would advise going through**Seshu**or**Fish and Belytschko**first, and then through the relevant chapter from**Reddy**‘s book on FEM. In any case, avoid Bathe, Zienkiewicz, etc.; they are too heavily engineering-oriented, and often, in general, un-necessarily heavy-duty (though not as heavy-duty as Lancosz). Not very suitable for learning the basics of CoV as is required in the UG QM. A good supplementary book covering CoV is noted next. **“From calculus to chaos: an introduction to dynamics” by David Acheson**. A gem of a book. Small (just about 260 pages, including program listings—and just about 190 pages if you ignore them.) Excellent, even if, somehow, it does not appear on people’s lists. But if you ask me, this book is a must read for any one who has anything to do with physics or engineering. Useful chapters exist also on variational calculus and chaos. Comes with easy to understand QBasic programs (and their updated versions, ready to run on today’s computers, are available via the author’s Web site). Wish it also had chapters, say one each, on the mechanics of materials, and on fracture mechanics.**Linear algebra**. Here, keep your focus on understanding just the two concepts: (i) vector spaces, and (ii) eigen-vectors and -values. Don’t worry about other topics (like LU decomposition or the power method). If you understand these two topics right, the rest will follow “automatically,” more or less. To learn these two topics, however, don’t refer to text-books (not even those by Gilbert Strang or so). Instead, google on the online tutorials on**computer games programming**. This way, you will come to develop a far better (even robust) understanding of these concepts. … Yes, that’s right. One or two games programmers, I very definitely remember, actually did a much superior job of explaining these ideas (with all their complexity) than what any textbook by any university professor does. (iii) Oh yes, BTW, there is yet another concept which you should learn: “tensor product”. For this topic, I recommend Prof.**Zhigang Suo**‘s notes on linear algebra, available off iMechanica. These notes are a work in progress, but they are already excellent even in their present form.**Probability.**Contrary to a wide-spread impression (and to what one group of QM interpreters say), you actually don’t need much of statistics or probability in order to get the essence of QM right. Whatever you need has already been taught to you in your UG engineering/physics courses.Personally, though I haven’t yet gone through them, the two books on my radar (more from the data science angle) are:**“Elementary probability” by Stirzaker**, and**“All of statistics” by Wasserman**. But, frankly speaking, as far as QM itself is concerned, your intuitive understanding of probability as developed through your routine UG courses should be enough, IMHO.- As to
**AJP type of articles**, go through**Dan Styer**‘s paper on the nine formulations (doi:10.1119/1.1445404). But treat his paper on the common misconceptions (10.1119/1.18288) with a bit of caution; some of the ideas he lists as “misconceptions” are not necessarily so. **arXiv tutorials/articles**: Sometime after finishing quantum chemistry and before beginning quantum physics, go through the tutorial on QM by**Bram Gaasbeek**[^]. Neat, small, and really helpful for self-studies of QM. (It was written when the author was still a student himself.) Also, see the article on the postulates by Dorabantu [^]. Definitely helpful. Finally, let me pick up just one more arXiv article: “Entanglement isn’t just for spin” by Dan Schroeder [^]. Comes with neat visualizations, and helps demystify entanglement.**Computational physics:**Several good resources are available. One easy to recommend text-book is the one by**Landau, Perez and Bordeianu**. Among the online resources, the best collection I found was the one by**Ian Cooper**(of Univ. of Sydney) [^]. He has only MatLab scripts, not Python, but they all are very well documented (in an exemplary manner) via accompanying PDF files. It should be easy to port these programs to the Python eco-system.

Yes, we (finally) are near the end of this post, so let me add the mandatory catch-all clauses: This list is by no means comprehensive! This list supersedes any other list I may have put out in the past. This list may undergo changes in future.

Done.

OK. A couple of last minute addenda: For contrast, see the article “What is the best textbook for self-studying quantum mechanics?” which has appeared, of all places, on the Forbes! [^]. (Looks like the QC-related hype has found its way into the business circles as well!) Also see the list at BookScrolling.com: “The best books to learn about quantum physics” [^].

OK. Now, I am *really* done.

**A song I like:**

(Marathi) “kiteedaa navyaane tulaa aaThavaave”

Music: Mandar Apte

Singer: Mandar Apte. Also, a separate female version by Arya Ambekar

Lyrics: Devayani Karve-Kothari

[Arya Ambekar’s version is great too, but somehow, I like Mandar Apte’s version better. Of course, I do often listen to both the versions. Excellent.]

[~~Almost 5000~~ More than 5,500 words! Give me a longer break for this time around, a much longer one, in fact… In the meanwhile, take care and bye until then…]

Pingback: A list of books for understanding the non-relativistic QM — Ajit R. Jadhav’s Weblog | Gentzen translated